PDA

View Full Version : MISSFIRES



dave_h
27-03-2006, 11:29 AM
Hi,

I'm having problems with missfires in the wet weather
I've already replaced HT leads / distributor cap / rotar arm / plugs.

This solved the problem for a while but over the last very wet weekend missfires have started again. It doesn't seem to dry out either - when left overnight or while driving.

I'm tempted to replace the coil today - It's very old
Does anyone have any other ideas as to what to try next??

Cheers
dave:mad: :mad: :mad:

RNRMF
27-03-2006, 11:35 AM
Do you have any kind of splash-gaurd?
proven techniques include...

The ice-cream tub lid: zip tie an ice-cream tub lid behind the grille in front of the dizzy, this will offer protection from puddles etc.

The rubber glove: get a rubber glove, cut off the finger tips, put glove over dizzy and thread the leads through the fingers, tape/zip tie the fingers up, this will waterproof the dizzy + it's connections. Obviously make sure everything is dry before doing this or you will just trap the water in!

dave_h
27-03-2006, 11:59 AM
Hi Darren,

Yes I do have a splash guard but I will try your suggestion aswell.
Do you think it will definitely be the distributor getting damp as I am driving along??

Cheers
dave

t boy
27-03-2006, 12:30 PM
if it is only doing it in the wet thwn yes try sparing some wd40 on leads and plugs whenthis happens to see if it stops it

dave_h
27-03-2006, 01:15 PM
I did try spraying the plugs and leads when I was out in the wet but had no joy (they all seem dry anyway).

Through a process of elimination I guess it must be the distributor.
I'll try the rubber glove technique - go out in the wet and see if it stops it.
I'll let you know.

Nice 1
Dave

RNRMF
27-03-2006, 02:15 PM
What ignition system are you running - points or electronic? If the spark is breaking down then new parts that werent the cause of the problem (if you see what I mean) would help for a little while. It is worth changing the points and condensor if using that system as they are only a couple of quid, and if it continues then change the coil, they are only 10/15 quid. After that you will of changed all the major electrical bits so it should work fine!

dave_h
29-03-2006, 01:22 PM
Got some good new leads. I'm not getting shocks of them anymore.
Seems to be firing much better.

Just have to wait for a wet day and see if i still get missfires.
Guess I wont have to wait for too long . . .

Thanks!!:) :)